WILLIAM F NYE INC -- SYNTHETIC OIL 167A  -- 9150-00N043037
<pre>=====================  Product Identification  =====================

Product ID:SYNTHETIC OIL 167A
MSDS Date:10/22/1987
FSC:9150
NIIN:00N043037
=== Responsible Party ===
Company Name:WILLIAM F NYE INC
Box:G-927
City:NEW BEDFORD
State:MA
ZIP:02742
Country:US
Info Phone Num:508-996-6721
Emergency Phone Num:508-758-4408;508-993-4685
Preparer's Name:GBM
CAGE:98354
=== Contractor Identification ===
Company Name:NYE LUBRICANTS INC
Address:12 HOWLAND RD
Box:City:FAIR HAVEN
State:MA
ZIP:02719
Country:US
Phone:508-996-6721
CAGE:98354

=============  Composition/Information on Ingredients  =============

Ingred Name:NONHAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: POSSIBLE SKIN & EYE IRRITATION.
    POSSIBLE RESPIRATORY PASSAGE IRRITATION AT HIGH TEMPERATURES.
    CHRONIC: NONE KNOWN. THERE IS NO EXPERIENCE WITH OVEREXPOSURE.
    PROLONGED/REPEATED CONT W/ SKIN/EYES  MAY CAUSE IRRIATION. INHAL OF
    MISTS/VAPS FROM MATERIAL AT HIGH TEMPERATURES MAY IRRITATE RESP
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: PASSAGES.
Medical Cond Aggravated by Exposure:NONE.

=======================  First Aid Measures  =======================

First Aid:EYE: WASH THORO FOR AT LEAST 15 MINUTES; CONTACT PHYSICIAN IF
    IRRITATION PERSISTS. SKIN: WASH WITH SOAP AND WATER. INHAL: MOVE TO
    FRESH AIR AND REFER TO A PHYSICIAN FOR TREATMENT. INGEST: CALL MD
    IMME D .

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:320F,160C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . AVOID SMOKE INHALATION. WATER/FOAM MAY CAUSE
    FROTHING.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE FREE LIQUID. ADD ABSORBENT (SAND,
    EARTH, SAWDUST) TO SPILL AREA. AFTER REMOVING ABSORBENT, WASH
    WALKING SURFACES THORO WITH DETERGENT AND WATER TO REDUCE SLIPPING
    HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:EXERCISE ORDINARY CARE IN HANDLING
    CHEMICAL. AVOID CONTAMINATION OF CIGARETTES/OTHER TOBACCO PRODUCT.
Other Precautions:USERS SHOULD BE ALERT TO THE POSSIBILITY THAT VERY
    SMALL PERCENTAGES OF THE POPULATION MAY DISPLAY UNEXPECTED ALLERGIC
    SKIN REACTIONS TO OTHERWISE INNOCUOUS INDUSTRIAL CHEMICALS AND RAW
    MATERIALS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNLESS MISTS, SMOKE/VAPORS ARE
    PRODUCED AT HIGH TEMPERATURES. USE NIOSH/MSHA APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN . TLV 5 MG/M3 FOR OIL MIST.
Ventilation:NONE REQUIRED UNLESS MISTS, SMOKE/VAPORS ARE PRODUCED AT
    HIGH TEMPERATURES.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THORO BEFORE SMOKING. EXERCISE
    ORDINARY MEASURES OF PERSONAL HYGIENE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:590F,310C
Melt/Freeze Pt:M.P/F.P Text:-100F,-73C
Vapor Pres:NEGLIGIBLE
Vapor Density:HVR/AIR
Spec Gravity:0.79(H2O=1)
pH:NEUTR
Evaporation Rate &amp; Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, ODORLESS LUBRICATING OIL
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:PYROLYSIS.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON MONOXIDE AS
    WELL AS SMALL AMOUNTS OF OTHER TOXIC FUMES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:MANY STATES CLASSIFY WASTE LUBRICANTS AS
    "HAZARDOUS" WHICH MEANS DISPOSAL ONLY BY A LICENSED FIRM. CONSULT
    LOCAL, STATE AND FEDERAL REGULATIONS APPLICABLE TO YOUR AREA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.